(Pipe joints)

Hydraulic term, is to connect the hydraulic system installed in the pipe or pipe on the hydraulic component parts, which is a fluid path to the assembly and disassembly of the connector in general.

Include: welding, card sets and Expanding

Connector Accessories

Including: nut, ferrule, flare cores, flaring sets, flare nut

Edit this paragraph Connector Type

End through connector, straight connectors, tees, elbows, with live nut connector, hinged joints, plugs, connectors and other transition

Two-ferrule connector components: first ring after ring, nut

Material used is stainless steel and copper

Metric, U.S. and British standard thread

NPT, PT, G are the pipe thread.

NPT is National (American) Pipe Thread acronym, is the U.S. standard pipe thread 60 degree cone for North America. National standards can be found GB/T12716-1991

PT is an abbreviation Pipe Thread, 55-degree tapered pipe thread sealing, is a Whitworth thread family, and more for Europe and Commonwealth countries. Water and gas pipes commonly used in industry, defined as 1:16 taper. National standards can be found GB/T7306-2000

G is non-threaded 55-degree pipe thread sealing, is a Whitworth thread family. Marked G on behalf of cylindrical thread. National standards can be found GB/T7307-2001 another thread in the 1 / 4, 1 / 2, 1 / 8 size marker is the thread diameter, the unit is inches.

The trade is usually divided to refer to thread size, one inch equals 8 points, 1 / 4 inch is 2 points, and so on.

If G is a pipe thread collectively (Guan), 55,60 the degree of division is functional, commonly known as a round tube. Threaded by a cylindrical surface that is processed.

ZG commonly known as tube cone, threaded by a conical surface that is processed from the pipe joints in general are like the old mark for the domestic thread marked for R Rc male metric thread with a pitch to represent the United States and Britain screw threads per inch the number of teeth within the thread said that this was the biggest difference between them,

Metric 60 degree side tooth type, inch thread is 55 degree isosceles tooth type, JIC 60 degree.

Metric threads with metric units, U.S. and British Imperial system of units with a thread.

Pipe thread is mainly used for pipe connections, in close cooperation with its external thread, a straight pipe with cone two. Nominal diameter is the diameter of the pipe is connected, obviously a large diameter than the nominal thread diameter.

1 / 4, 1 / 2, 1 / 8 inch thread is the nominal diameter in inches.